Curtisbeef » Gallery

First Logfile

Curtisbeef — Wed, 27 May 2009 08:03:45 +0000

This is a Logfile off my MicroSD card, the first digits are the Microseconds since the microcontroller has been on, the next three sets digits are the raw 10-bit ADC values. The code is sloppy at the moment and has to be optimized, as you can see I’m getting inconsistent sample periods.

MicroSD slocket Added to Accelerometer Sheild

admin — Wed, 27 May 2009 03:02:32 +0000

Here I added a Surface mount Micro SD card socket (again soldered with 30AWG wires) and super glued to the board carefully not to mess up the spring inside the connector.

Houston we have data!

Curtisbeef — Tue, 26 May 2009 23:47:41 +0000

Woot! here is some software I threw togeather in VB6 (I know, Gross) to help me debug my Accelerometer data.

DIY Arduino Accelerometer Shield

Curtisbeef — Tue, 26 May 2009 21:38:19 +0000

This is a Little DIY Accelerometer Sheild that I built to mess around with my Arduino. It uses a MMA7260 from Freescale. Its a QFN so I hand soldered (30AWG) Wrapping Wire to the pins I needed and mounted it on a small PCB. Who needs breakout boards

Super Ghetto RS232 Converter

admin — Tue, 26 May 2009 05:20:00 +0000

I needed a 3.3v serial to TTL converter so I threw this togeather a Max3232 out of stuff I had laying around. Works like a charm.

Arduino Pro 3.3v

Curtisbeef — Tue, 26 May 2009 05:13:07 +0000

Got this Arduino Pro 3.3v free from a HackedGadgets.com Contest