This is a Logfile off my MicroSD card, the first digits are the Microseconds since the microcontroller has been on, the next three sets digits are the raw 10-bit ADC values. The code is sloppy at the moment and has to be optimized, as you can see I’m getting inconsistent sample periods.

Here I added a Surface mount Micro SD card socket (again soldered with 30AWG wires) and super glued to the board carefully not to mess up the spring inside the connector.

Woot! here is some software I threw togeather in VB6 (I know, Gross) to help me debug my Accelerometer data.

This is a Little DIY Accelerometer Sheild that I built to mess around with my Arduino. It uses a MMA7260 from Freescale. Its a QFN so I hand soldered (30AWG) Wrapping Wire to the pins I needed and mounted it on a small PCB. Who needs breakout boards

I needed a 3.3v serial to TTL converter so I threw this togeather a Max3232 out of stuff I had laying around. Works like a charm.

Got this Arduino Pro 3.3v free from a HackedGadgets.com Contest